# metal zone mods

There’s SO much gain on tap that you really don’t need all of it on at once. Removing them turns the Metal Zone into a vanilla hard-clipper with a versatile EQ section, e.g.

April 09, 2020, How to turn a metal zone into a Tubescreamer Two functions. Other custom pinball MODs available, so check back often! • Hey! They sound great together but now you really, So you’ve honed your acoustic guitar chops, and you want to take your playing to the stage! But also, when you do that (not just with the MT-2 but with any high gain amp or pedal) you just lose all sense of definition and clarity in your tone. guitar effects • As much as everyone bad-talks the Metal Zone, it probably has one of the most sophisticated EQ sections of any Boss pedal – probably why it’s so easy to get a shitty sound, which it has (unfairly) become famous for. And we think we know why – it’s because almost everyone has owned one at some point since its release all the way back in 1991 (yes, your first year MT-2 is almost vintage now!).

There’s not much spare space inside the Metal Zone, so getting the extra pot to fit was a challenge. There are BOSS fans, and then there are BOSS fans. June 05, 2018, A few easy Boss SD-1 Super Overdrive Mods Enhance your pop bumpers, flasher domes and flippers with these decals. \m/, CAN I USE GUITAR PEDALS ON BASS?HOW TO USE THE BOSS NS-2 NOISE SUPPRESSOR IN YOUR RIG. tone control circuit on any mass-market pedal.

On the record, you can get away with more scooped tones because the engineers can EQ it such that all instruments have their own place in the mix (so the guitars don’t get drowned out).

If you want a really good technical explanation of the MT2, check out http://electricdruid.net/boss-mt-2-metal-zone-pedal-analysis/. Recently on our youtube channel I've been doing a few different Metal Zone mods for fun. You'd still have another $155 from your budget to get something else if you feel like it. a pretty useful dirt pedal. Hello all. The pedal everyone loves to hate. Removing them sounds pretty cool to me, except that for sustained notes/chords at medium Distortion settings have a kind of abrupt transition from distorted to clean sound as they decay. Try the MT-2 with the Distortion sitting around 10 o’clock. The two 12AX7 tubes work very well and generate a great tone.. All work through an high quality chip. My good mate Bob asked me if it’s possible to mod his MT2 to be more suitable for bass guitar. With a bit of creative EQ and lower gain, you might find yourself surprised once again – here’s the Metal Zone doing some blues! Experiment with small changes to the EQ to find your sound, and don’t be afraid of dialling the gain down. '04 Boss TU-2 chromatic tuner, silent tuning with LEDs, thisis one of the best tuners we have found, can use with power daisy chain topower other pedals too, new$99. I recommend starting with C25, seeing what you think, then removing C24 if you want a fuller distortion sound. A little boost to the upper mids can help bring you forward in the mix, or, a surgical cut to the lower mids might help tighten up your sound and reduce muddiness – experimentation is your friend here. In fact, it provides a more complete equalization section with a dedicated knob for mids. Keep on keeping on, in the Metal Zone! Take a listen here. Ah, this infamous Metal Zone! Be the first to know when more are listed: The Boss MT-2 Metal Zone Distortion w/ Keeley Mod is the heaviest modification ever produced by the company, combining an armada of component improvements for low noise, improved harmonics, and a triple threat of diode options for an army of metal in a single box. Ok, so I wired it for true bypass and put a Millennium 2 indicator led drive circuit in, and that all works fine. Keeley Mod. We’ve all made that mistake. Oops, looks like you forgot something. I did a search online for any interesting MT-2 mods and stumbled upon a thread on freestompboxes.org on Boss Metalzone MT2 mods . Since the EQ controls are so powerful, small changes make a big difference. I believe these mods have improved the pedal a great deal. Removing these components disconnect the MT-2’s gyrator EQ circuits from the rest of the pedal. Now you might be thinking – what can you say about the Metal Zone that hasn’t been said before?Well, it’s pretty simple really – you’ve probably been using the MT-2 wrong. The pre-amp section features two channels and the editing is fast and easy, thanks to many knobs for the parameters. Enhance your pop bumpers, flasher domes and flippers with these decals. Among the many modifications of the Metal Zone certainly the most famous and appreciated job. These diodes hard-clip the signal, but they are not the only part of the circuit that distorts (the opamps clip as well). With a bit of creative EQ and lower gain, you might find yourself surprised once again – here’s the Metal Zone doing some blues!

You know, that (generally awful – more power to you, stock Metal Zone users!

We don’t want to hack out a huge hole out of the mid frequencies (see previous section) or boost the living daylights out of the highs or lows. Metal-Mods: Custom chrome decals for pinball machines.

D3 & D4 – Remove one or both of them with cutting pliers for more volume, a different character to the distortion, and a nearly-clean sound at minimum Distortion settings. Tubescreamers and Rats also feature band-limited distortion.) Germany, I've had quite a few comments on how I'm doing it, so I figured I'd show you the thought process behind it. Removing them turns the Metal Zone into a vanilla hard-clipper with a versatile EQ section, e.g. The next thing was the “blend” control.

But bear with me, and let me see if I can convince you…, Contributed by Ed Lim for the Roland Australia Blog. August 14, 2016 August 14, 2016 Marcus. 8-17-2011 — New Mod for the Boss NS-2 now available here. You’ll have a tough time doing that live so it’s best not to cut yourself out of the mix before you’ve even started playing. Big call, I know. I believe these mods have improved the pedal a great deal. Don’t even go past 12 o’clock if you ask me. It generates a natural tube sound, more robust and fat than the original. tube screamer • It produces an extraordinary powerful output and ultra basses. MT-2 Metal Zone Mods 03-27-2011, 10:08 PM. A looper, a drum machine and a tuner. Metal-Mods: Custom chrome decals for pinball machines. The Boss MT-2 Metal Zone distortion pedal is one of the most complex drive pedals there is, and has probably the most sophisticated (and least understood!)

This is my first post here. So next time you head to a jam to discover that you left your Blues Driver at home by mistake, don’t fret – that spare MT-2 that everyone has can get you through! Optional no-solder mods D3 & D4 – Remove one or both of them with cutting pliers for more volume, a different character to the distortion, and …

So what CUBE is the one for.

Therefore it turns out more flexible and versatile. Learn More, We understand the importance of online privacy and are committed to complying with the EU General Data Protection Regulation. The MT-2 is, in my opinion, a more appropriate choice in a classic context, like Green Day, AC/DC, Led Zeppelin and so on. Unscrew the bottom plate of your Metal Zone; you should be able to work the circuit board down without removing the knobs or unscrewing the input and output jacks. There are a couple of reasons, and here’s the short version: The EQ controls on the MT-2 are extremely powerful – each of the High, Mid and Low knobs gives you the ability to boost or cut a whopping 15dB, while the Mid Freq knob (which lets you control the frequency that’s affected by the Mid knob) has a very wide range of 200Hz to 5kHz! Pushing the knob alternates between the two parameters. There are a couple very simple mods (just a switch and wire required) for the MT-2 that make it a fantastic pedal for what it was meant to do. You’ll find yourself in punk/hardcore territory, with aggressive crunchy distortion. The lower noise level than the original version, the high quality of every component, the superior bass response and the more robust gain are the main characteristics. For reference, here is the schematic and board layout: http://electricdruid.net/boss-mt-2-metal-zone-pedal-analysis/, C34: Replaced with a 0.047uF (stock was 0.027uF). The Boss MT-2 Metal Zone Distortion w/ Keeley Mod is the heaviest modification ever produced by the company, combining an armada of component improvements for low noise, improved harmonics, and a triple threat of diode options for an army of metal in a single box.
EUR These were fairly uncommon types of mods, for example turning a Metal Zone into a fuzz, or overdrive, or even just a transparent EQ pedal. So now it has a glorious knob sticking out of the side like a bolt on Frankenstein’s neck. Also, just finished an mp3 of this awesome mod. It’s also quite a divisive beast, with some loving it, and others hating it. So – don’t dime the gain. The blend knob works great, and will be awesome on bass. Other custom pinball MODs available, so check back often! It’s funny – everyone has an opinion on the trusty ol’ Metal Zone. It’s a perfectly natural first instinct – you’ve just heard Master of Puppets, it sounds awesome, and you’ve seen the famous V-shaped graphic EQ that was used to get that signature tone. September 14, 2017. Once again to use your 15 year old self as an example – as a young metalhead, your first response upon getting an MT-2 is probably to give the mid frequencies a big ol’ scoop (after maxing out the gain, of course!). Despite what it says on the tin, the Metal Zone can do more than just metal. HOW TO USE THE BOSS NS-2 NOISE SUPPRESSOR IN YOUR RIG, The BOSS Pedal Project – One Man’s Journey To Collect Every BOSS Pedal Ever Made, Why the ME-80 is the Best Multi FX for Beginners, How To Amplify Your Acoustic To Play Live. Based on your location, we've changed your settings: Shipping Region: mods • Among the many modifications of the Metal Zone certainly the most famous and appreciated job. boss •